- Reversible
- All sink dimensions may vary by plus or minus 2%
- Overflow will be at the front if reversed
- Suitable for a waste disposer
- Assembly required
- Mount Type: Inset
- Sink Shape: Rectangular
- Material: Ceramic
- Material Details:
- Stainless Steel Gauge:
- Resistance Type: Scratch;Stain;Rust;Heat;Fade
- Sound Deadening: No
- Finish: White
- Craftsmanship Type: No Craftsmanship
- Number of Basins: 2
- Basin Split: 80/20
- Drain Placement: Reversible
- Number of Faucet Holes: 1
- Suitable Water Pressure: Low Pressure
- What's Included (String): Overflow, Care Instructions
- Tap Included: No
- Faucet Material:
- Faucet Finish:
- Flow Rate LPM:
- Tap Type:
- Tap Features:
- Side Spray Included:
- Number of Faucets Included:
- Faucet Holes: Yes
- Apron Included: No
- Shutoff Valve Included: No
- Valve Type:
- Overflow Hole: Yes
- Soap Dispenser Included: No
- Soap Dispenser Material:
- Number of Soap Dispensers Included:
- Compatible Soap Dispenser Part Number:
- Waste Included: Yes
- Basket Strainer Included: Yes
- Basket Strainer Material: Stainless Steel
- Number of Basket Strainers Included:
- Bottom Grid Included: No
- Bottom Grid Material:
- Protective Bumpers:
- Protective Feet:
- Number of Sink Grids Included:
- Colander Included: No
- Number of Colanders Included:
- Cutting Board Included: No
- Number of Cutting Boards Included:
- P-Trap Included: No
- Number of P-Traps Included:
- Kitchen Sink Workstation:
- Compatible Cutting Board Part Number:
- Compatible Colander Part Number:
- Country of Origin: Germany
- Accessories Included?: Yes
- Drain Assembly: Yes
- Overflow Hole (Old): Yes
- Additional Pieces Included:
- [EU Only] Compatible Water Trap Part Number: CPK100
- Compatible Tap Part Number: RID/SS
- Compatible Waste Part Number:
- Fade resistant: No
- Food Waste Disposer's switch Included: No
- Tap Material Details:
- Material Details (String): Ceramic
- Stiftung Warentest Note:
- ASME A112.18.2 Compliant:
- ASME A112.19.2/CSA B45.1 Compliant:
- ASSE 1001 Certified:
- UL Listed:
- ADA Compliant:
- BS 476 Compliant:
- CALGreen Compliant:
- FIRA Certified:
- ISTA 3A or 6A Certified: No
- GSA Approved:
- ISO 14000 Certified:
- ISTA 1A Certified: No
- ISO 14001 Certified:
- EN 14688:2018 Certified: Yes
- ISO 9000 Certified:
- ISO 9001 Certified:
- ASME A112.19.1:
- ASME A112.19.1/CSA B45.2 - 2018 Compliant:
- CSA Certified:
- ASME A112.19.3 Compliant:
- cUPC Certified:
- cUL Listed:
- UL 1951 Listed:
- IAPMO Certified:
- CSA B125.1 Certified:
- NAHB Compliant:
- UPC Certified:
- Vermont Act 193 Compliant:
- NSF Certified:
- Energy Policy Act 1992 Compliant:
- ASME A112.18.1 Compliant:
- Low Lead Compliant:
- Energy Star Compliant: No
- TÜV Rheinland Certified:
- Are you CE Certified?: Yes
- EU Economic Operator Information:
- Cut out dimensions: 97cm x 47cm
- 2 x 9cm Waste outlets for basket strainer wastes
- Exposed Apron Height - Top to Bottom:
- Faucet Hole Diameter: 35
- Overall Length - Side to Side: 1000
- Overall Width - Front to Back: 510
- Exposed Apron Length - Side to Side:
- Overall Sink Depth - Top to Bottom: 210
- Minimum Base Cabinet Width - Side to Side: 600
- Maximum Deck Thickness: 40
- Overall Product Weight: 31
- Basin Width - Front to Back: 345
- Basin Length - Side to Side: 390
- Basin Depth - Top to Bottom: 180
- Volume Capacity:
- Left Basin - Width (Front to Back):
- Left Basin - Length (Side to Side):
- Left Basin/Tub Depth - Top to Bottom:
- Right Basin - Width (Front to Back):
- Right Basin - Length (Side to Side):
- Right Basin/Tub Depth - Top to Bottom:
- Drain Diameter: 35
- Basket Strainer Diameter: 90
- Unit of Measurement in Dimensional Drawing: mm
- Installation Required: Yes
- Tools Needed for Installation: Depends on type of install, please refer to manual/fitter
- Additional Parts Required: Yes
- Parts Needed: Silicone
