Bathroom Gasket, Anti-Mold Tape, Non-Stick Coating with Non-Stick Coating for Kitchen Bathroom Bathtub, Transparent (3cm x 5m, 5cm x 5m) - DKSFJKL

Bathroom Gasket, Anti-Mold Tape, Non-Stick Coating with Non-Stick Coating for Kitchen Bathroom Bathtub, Transparent (3cm x 5m, 5cm x 5m) - DKSFJKL
Brand: DKSFJKL
12.83 GBP 15.4 GBP
Buy Now

Package Dimensions: 11 x 10.6 x 8cm; 360 grams Color: Color1 Material: Acrylic, Pe, Silicone Batteries included? : No Battery (s) required: No Spare parts availability: Information on spare parts not available Characteristics: Color: transparent. Type: clear acrylic tape. Material: acrylic. Length: 5m. Width: 30 mm / 50 mm. Package contents: 1 adhesive tape (5cm * 5m) . 1 adhesive tape (3cm * 5m) . Instructions: 1. Please clean the surface thoroughly and make sure it is dry, remove any existing silicone liner before installation. 2. Measure the length of the area to be sealed to determine the correct length and cut the strips accordingly. 3. Remove the strip, measure the same length of the area and mark on the strip with the pencil, then cut it. 4. Then place the tape where you need to seal, keep peeling off the tapes until the installation is finished. 5. Room temperature around 25 ° C for the best, if the temperature is too low, use a hair dryer to heat the paste before sealing for