- With draining board
- Sound dampening pads
- Reversible (faucet holes not pre-cut)
- Mount Type: Inset
- Sink Shape: Rectangular
- Material: Stainless steel
- Material Details:
- Stainless Steel Gauge: 23
- Resistance Type: Stain;Rust
- Sound Deadening: Yes
- Finish: Stainless Steel
- Craftsmanship Type: No Craftsmanship
- Number of Basins: 2
- Basin Split: 70/30
- Short Height Divider: Yes
- Drain Placement: Center
- Tap Included: No
- Faucet Material:
- Faucet Finish:
- Flow Rate LPM:
- Tap Type:
- Tap Features:
- Side Spray Included:
- Number of Faucets Included:
- Shutoff Valve Included: No
- Valve Type:
- Overflow Hole: Yes
- Deck Plate Included: No
- Soap Dispenser Included: No
- Soap Dispenser Material:
- Number of Soap Dispensers Included:
- Compatible Soap Dispenser Part Number:
- Waste Included: No
- Basket Strainer Included: No
- Basket Strainer Material:
- Number of Basket Strainers Included:
- Bottom Grid Included: No
- Bottom Grid Material:
- Protective Bumpers:
- Protective Feet:
- Number of Sink Grids Included:
- Compatible Bottom Grid Part Number:
- Colander Included: No
- Number of Colanders Included:
- Cutting Board Included: No
- Number of Cutting Boards Included:
- Repair Kit Included: No
- P-Trap Included: Yes
- Number of P-Traps Included:
- Sink Caddy / Sponge Holder Included: No
- Number of Sink Caddies / Sponge Holders Included:
- Kitchen Sink Workstation: No
- Compatible Cutting Board Part Number:
- Compatible Colander Part Number:
- Supplier Intended and Approved Use: Residential Use;Non-Residential Use
- Country of Origin: Belgium
- Additional Pieces Included:
- Compatible Tap Part Number:
- Compatible Rubbish/Garbage Disposal Part Number:
- Compatible Waste Part Number:
- Purposeful Distressing Type: No Distressing
- Food Waste Disposer's switch Included: No
- Tap Material Details:
- Stiftung Warentest Note:
- ASME A112.18.2 Compliant:
- ASME A112.19.2/CSA B45.1 Compliant:
- ASSE 1001 Certified:
- UL Listed:
- ADA Compliant:
- BS 476 Compliant:
- CALGreen Compliant:
- FIRA Certified:
- GSA Approved:
- ISO 14000 Certified:
- ISO 14001 Certified:
- EN 14688:2018 Certified: No
- ISO 9000 Certified:
- ISO 9001 Certified:
- ASME A112.19.1/CSA B45.2 - 2018 Compliant:
- ASME A112.19.1:
- CSA Certified:
- ASME A112.19.3 Compliant:
- cUPC Certified:
- cUL Listed:
- UL 1951 Listed:
- IAPMO Certified:
- NAHB Compliant:
- CSA B125.1 Certified:
- UPC Certified:
- Vermont Act 193 Compliant:
- NSF Certified:
- Energy Policy Act 1992 Compliant:
- Low Lead Compliant:
- ASME A112.18.1 Compliant:
- Energy Star Compliant:
- TÜV Rheinland Certified:
- CE Certified: Yes
- UKCA Marked:
- General Product Safety Directive Compliant: Yes
- REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Compliant: No
- UK Water Supply and Water Fitting Compliant: Yes
- TMV2 (Thermostatic Mixing Valve) Scheme Compliant:
- With plug and space saving siphon 6/4" x 40mm
- Overall Length - Side to Side: 100
- Overall Width - Front to Back: 50
- Overall Sink Depth - Top to Bottom: 17
- Minimum Base Cabinet Width - Side to Side: 60
- Overall Product Weight: 4.5
- Basin Width - Front to Back: 50
- Basin Length - Side to Side: 100
- Basin Depth - Top to Bottom: 17
- Left Basin - Width (Front to Back): 40
- Left Basin - Length (Side to Side): 34
- Left Basin/Tub Depth - Top to Bottom: 17
- Right Basin - Width (Front to Back): 34
- Right Basin - Length (Side to Side): 16
- Right Basin/Tub Depth - Top to Bottom: 9
- Apron Included: No
- Exposed Apron Height - Top to Bottom:
- Exposed Apron Length - Side to Side:
- Faucet Holes: No
- Faucet Hole Diameter:
- Tap Centres:
- Drain Diameter: 9
- Installation Required: Yes
- Tools Needed for Installation:
- Commercial Warranty: Yes
- Commercial Warranty Length: 2 Years
- Manufacturer Warranty: Yes
- Warranty Length: 2
