The Manrose 100mm In-Line Fan Kit with LED Lamp is a unique shower light which is connected to a circular diffuser with a concealed extractor fan. It is perfect for use in close proximity to showers in bathrooms and ensuites. With its sleek chrome finish, it will blend in seamlessly into your décor, providing a rich pleasant glow of soft light as you shower. This Fan-kit can be installed to the area where splash is at its highest possibility (the splash region) near the shower or bath. Because it is powered by a SELV remote safety isolating transformer it can remove moisture to be removed before it can reach the walls, reducing the chance of mould as well as any nasty odours produced by moist materials in your bathroom. Contained in these bathroom accessories are a Showerlite unit, transformer, and one length of PVC flexible ducting, external wall grille, fixing screws, plugs and straps. This unit gives you customisation over the unit usage as it contains an integrated electronic timer. Technical Data: Noise level: 41dB Power Rating: 0.015W Fan Technology: Axial Mounting: Ceiling Fan Speed (rpm): 2400 Maximum Operating Temperature: 40°C Dimensions Diameter: 140mm Depth: 74mm Blade size: 4"/100mm Timer controlled Extractor fans with a built-in timer control means that the fan will operate with the bathroom light switch and then overrun for a set amount of time to continue removing moisture from the air. This is great for steamy bathrooms, allowing you to turn the light off but continue with extraction for a short time. Axial Axial type fans cause gas to flow through in an axial direction which is parallel to the shaft where the blades rotate, making the flow axial at exit and entry. Axial fans are designed to create a pressure difference and force which produces a flow through the fan. 30 ltr/s extraction rate Building regulations stipulate that extractor fans need to be able to extract at least 15 litres of air per second. It’s needed to ensure a minimal build-up of moisture in the room, reducing mould and grime in damp areas. This fan will extract a crazy 30 litres per second! That’s twice what’s recommended! Zone 1 Rated IP rating stands for ‘Ingress Protection rating’ and this helps us determine what bathroom electricals can go in particular bathroom zones. An IP (Ingress Protection) number or code is used here in the UK to specify the environmental protection of enclosures around electronic equipment. These ratings are determined by specific tests. These extractor fans can be fitted within Zone 1 as shown below. IPX5 Rating This product have a rating of IPX5, meaning it is protected from water jets that are projected by a nozzle (6.3mm) from any angle. Recessed wall & ceiling installation These extractor fans can be installed through a wall or recessed giving you that extra bit of flexibility. They can also be installed as portrait or landscape.
