Heavy load: 285mm stretched position 190mm folded 100N / 10kg. Strong and durable thickening. Before 100N, they were stronger than 80N, and even then it didn’t take much force to move up and down. Easy to install: determine the center position of the rectangular mounting hardware, at 70mm from the back of the cap is the distance from the side of the cap, and drill 2 holes on both sides of the center point A; b. Determine the center of the circular mounting hardware, which is away from the rear of the cabinet 240mm from the top of the cabinet, 10mm from the top of the cabinet, marked B; position the connector by comparison and connect the joint to the frame. Stable and safe: supplied with fixings and screws for the two thrusters, replacing the existing ones without modifying the end support parts. The metal mounting plate of this gas spring has a large contact surface with the housing and is designed in three points. Technical specifications: Open them up to measure about 27cm, they
