Features of the Self-supporting frame for wall-hung toilets (AM101/1120-DN100) : For mounting on load-bearing or non-load-bearing walls For floor thickness 0-200 mm For installation of wall-hung toilet bowls with a connection pitch of 180 mm or 230 mm Adjustable anchor feet and spring locking system, with a range of 0-200 mm Visible marks for levelling and centre line Sliding Rail support for the drain connector can be adjusted to eight positions between 0 and 93 mm. Angle valve with possibility of connection to the Mepla pipe system For drywall, completely pre-assembled The installed module is covered with plasterboard and no additional fixing or anchoring elements are required. The polystyrene insulation construction prevents condensation from forming on the tank surface and dampens tank vibrations. Prepared for the connection of a bracket with a DG 1/2" conversion for bidet seats and sprays Independently adjustable dual flush with hygienic reserve Compatible with all AlcaPlast
