EAN: 4017212211168 - manufacturer-number: SNU5SL1kW - Energy efficiency class A, Energy efficiency classes spectrum A to G, Material of the boiler Plastic, Material Jacket Plastic, Volume of the container 5 l, Rated capacity 1 kW, Supply voltage 230V, three-phase design no, Frequency 50 Hz, embodiment Under-table, Base / undermount boiler no, With night current switching no, Applicable at normal water pressure yes, duo version no, Suitable for boiling water no, Warm-up time from 10 °C - 65 °C 18 min, Tapping power at 60 °C, continuous operation 5 l/min, wall installation yes, Horizontal placement no, Vertical placement yes, KIWA seal of approval no, With temperature display no, Temperature limit yes, With circulation connection no, Max. permissible operating pressure 0 bar, With faucet no, With pressure reducing valve no, With thermometer no, With cleaning opening no, protective anode no, Height 421 mm, Width 263 mm, Depth 230 mm, Cold drinking water connection External thread, Outside pipe diameter cold drinking water 17.2 mm, Hot water connection External thread, Outside pipe diameter hot drinking water 17.2 mm, Connection Tapping connection External thread, Nominal inside diameter Zapfanschluss 3/8 inch (10), Degree of protection (IP) IP24, Energy efficiency hot water 38 %, tap profile XXSAttention! Application notice:This item is a pressureless device (maximum permissible operating pressure = 0 bar). It must only be used with pressureless fittings (low-pressure fittings).Please note the difference between high-pressure and low-pressure fittings. The high-pressure fitting mixes the water inside the fitting. The low-pressure fitting is connected to a water tank (boiler) and has 3 connections. When heated in the tank, the water expands, which can cause the fitting to drip. - SNU 5 SL 1kW
