- no overflow
- countertop design
- requires a free running waste (not included)
- Any waste will fit this item but as there is no overflow, an unslotted waste is required.
- Type: Countertop Basin
- Corner Sink Installation Type:
- Dual Mount Installation Types:
- How to Install: If you are installing a vessel faucet with your vessel sink, you should install the faucet first. Once the faucet is installed, position the sink on the countertop. Then, use the sink mounting ring and hardware to hold and secure the sink to the countertop (make sure someone is helping you!). Lastly, connect the drain from the inside of the sink and then connect the p-trap to the bottom of the drain.
- Sink Shape: Circular
- Specialty Shape:
- Finish: White
- Primary Material: Ceramic
- Natural Variation Type: No Natural Variation
- What is an Overflow?: An overflow is a small hole in the back of the sink that prevents the sink from overflowing. When the sink is full of water, this hole allows air to circulate to the drain so the water can drain more quickly.
- Overflow Hole: No
- Tap Included: No
- Flow Rate (LPM):
- Handles Included: No
- Craftsmanship Type: No Craftsmanship
- Waste Included: No
- Drain Type:
- What is a Shut-Off Valve?: A shut-off valve is connected to the water lines and allows you to turn off the water for just one plumbing fixture instead of your entire home.
- Shut-Off Valve Included: No
- What is a P-Trap?: A p-trap holds water to prevent sewer gases from entering the home through the drain. It also traps debris that has drained from the sink to prevent the plumbing system from being clogged.
- P-Trap Included: No
- What are Supply Lines?: Supply lines bring water and gas from the plumbing pipes behind your walls to your fixtures.
- Pedestal Included:
- Compatible Pedestal Part Number:
- Console Included:
- Compatible Mounting Materials Part Number:
- Shroud Included:
- Country of Origin: China
- Compatible Console Part Number:
- Compatible Shroud Part Number:
- Stiftung Warentest Note:
- ASME A112.18.2 Compliant:
- ASME A112.19.1/CSA B45.2 - 2018 Compliant:
- ADA Compliant:
- UL Listed:
- ASME A112.19.2/CSA B45.1 Compliant:
- ASME A112.19.3 Compliant:
- ASSE 1001 Certified:
- ASSE 1016 Certified:
- TÜV Rheinland Certified:
- NSF/ANSI 61 Certified:
- cUL Listed:
- ISO 14000 Certified:
- ISO 9000 Certified:
- CSA Certified:
- UL 1951 Listed:
- CSA B125.1 Certified:
- UPC Certified:
- NAHB Compliant:
- Vermont Act 193 Compliant:
- IAPMO Certified:
- NSF Certified:
- ASME A112.18.1 Compliant:
- Low Lead Compliant:
- Energy Star Compliant:
- Recycled Content: No
- CE Certified:
- cUPC Certified:
- UKCA Marked: No
- CSA B45.5/IAPMO Z124 Compliant - Plastic Plumbing Fixtures:
- General Product Safety Directive Compliant: No
- REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Compliant: No
- UK Water Supply and Water Fitting Compliant:
- TMV2 (Thermostatic Mixing Valve) Scheme Compliant:
- Internal dimensions of the basin: 415 x 415mm.
- Basin Depth - Top to Bottom:
- Overall Width - Side to Side: 415
- Overall Depth - Front to Back: 415
- Overall Height - Top to Bottom: 135
- Overall Product Weight: 8.55
- Pedestal Height - Top to Bottom:
- Pedestal Depth - Front to Back:
- Waste Connection Diameter:
- Installation Required : Yes
