EAN: 4017212221723 - manufacturer-number: SNU5SL+MAE-W - Built-under device 5l Energy efficiency class A, Material boiler tank Plastic, Surface material Plastic, Tank volume 5l, Nominal power 2kW, Connection voltage 220 … 240V, Frequency 50/60 Hz, Design form Built-under, Can be used for normal water pressure, Heat-up time from 10°C - 65°C 9min, Tap capacity at 60°C, continuous 5l/min, Wall set-up, Position, vertical, Temperature limit, Max. allowable operating pressure 0bar, With tap, Height 421mm, Width 263mm, Depth 230mm, Cold tap water connection External thread, Nominal inner diameter, cold tap water 3/8 inch (10), External cold tap water tube diameter 17,2mm, Hot tap water connection External thread, Nominal internal diameter hot tap water 3/8 inch (10), Outer pipe diameter, hot tap water 17,2mm, Connection, drainage connection External thread, Nominal internal diameter drainage connection 3/8 inch (10), Degree of protection (IP) IP24, Water heating energy efficiency (Nwh) 38%, Capacity profile XXSAttention! Application notice:This item is a pressureless device (maximum permissible operating pressure = 0 bar). It must only be used with pressureless fittings (low-pressure fittings).Please note the difference between high-pressure and low-pressure fittings. The high-pressure fitting mixes the water inside the fitting. The low-pressure fitting is connected to a water tank (boiler) and has 3 connections. When heated in the tank, the water expands, which can cause the fitting to drip. - SNU 5 SL+MAE-W
