Auxiliary description. - Our product uses an adhesive coating and has excellent adhesion. After the tests, it was proved that this Toilet Paper Holder could hold 8 kg of items and would not fall. - Our product does not require drilling, glue, tools. Just peel off the protective membrane. on the back, install it in 30 seconds and there is no residue. So you don’t have to; worry that the walls you love may be damaged due to lack of space. - This toilet paper holder is not applicable on rough walls, chalky walls or hard surfaces. other smooth or uneven surfaces. Installation steps: 1.Remove dust or oily stains, then allow the wall to dry. 2. Mark the desired location. product on the bonding surface before installation. 3. Lubricate the sticker on the back of the product. 4.Remove the protective film from the double-sided tape. When the temperature is below 30 °C, use a hair dryer to make it stronger. 5. Stick the product on the marked adhesive surface and press for 10 or 30 seconds. 6.
